Transportation Inspectors
Job Zones group occupations into one of five categories based on the education, experience, and training typically needed to perform them.
Tasks
Specific duties and responsibilities regularly performed in this occupation.
- Prepare and submit reports after completion of freight shipments.88
- Inspect shipments to ensure that freight is securely braced and blocked.86
- Record details about freight conditions, handling of freight, and any problems encountered.85
- Advise crews in techniques of stowing dangerous and heavy cargo.78
- Observe loading of freight to ensure that crews comply with procedures.77
- Recommend remedial procedures to correct any violations found during inspections.77
- Post warning signs on vehicles containing explosives or flammable or radioactive materials.77
- Inspect loaded cargo, cargo lashed to decks or in storage facilities, and cargo handling devices to determine compliance with health and safety regulations and need for maintenance.76
- Measure heights and widths of loads to ensure they will pass over bridges or through tunnels on scheduled routes.76
- Notify workers of any special treatment required for shipments.75
- Direct crews to reload freight or to insert additional bracing or packing as necessary.74
- Check temperatures and humidities of shipping and storage areas to ensure that they are at appropriate levels to protect cargo.73
Show all 17 →
- Determine cargo transportation capabilities by reading documents that set forth cargo loading and securing procedures, capacities, and stability factors.72
- Read draft markings to determine depths of vessels in water.71
- Calculate gross and net tonnage, hold capacities, volumes of stored fuel and water, cargo weights, and vessel stability factors, using mathematical formulas.—
- Measure vessels' holds and depths of fuel and water in tanks, using sounding lines and tape measures.—
- Visually inspect cargo for damage upon arrival or discharge.—
Skills
Developed capacities that facilitate learning or the more rapid acquisition of knowledge.
- Critical Thinking66
Using logic and reasoning to identify the strengths and weaknesses of alternative solutions, conclusions, or approaches to problems.
- Reading Comprehension66
Understanding written sentences and paragraphs in work-related documents.
- Speaking66
Talking to others to convey information effectively.
- Writing66
Communicating effectively in writing as appropriate for the needs of the audience.
- Active Listening63
Giving full attention to what other people are saying, taking time to understand the points being made, asking questions as appropriate, and not interrupting at inappropriate times.
- Monitoring60
Monitoring/Assessing performance of yourself, other individuals, or organizations to make improvements or take corrective action.
- Time Management60
Managing one's own time and the time of others.
- Judgment and Decision Making56
Considering the relative costs and benefits of potential actions to choose the most appropriate one.
- Complex Problem Solving53
Identifying complex problems and reviewing related information to develop and evaluate options and implement solutions.
- Coordination53
Adjusting actions in relation to others' actions.
- Social Perceptiveness53
Being aware of others' reactions and understanding why they react as they do.
- Systems Evaluation50
Identifying measures or indicators of system performance and the actions needed to improve or correct performance, relative to the goals of the system.
Show all 35 →
- Systems Analysis47
Determining how a system should work and how changes in conditions, operations, and the environment will affect outcomes.
- Active Learning44
Understanding the implications of new information for both current and future problem-solving and decision-making.
- Instructing44
Teaching others how to do something.
- Management of Personnel Resources44
Motivating, developing, and directing people as they work, identifying the best people for the job.
- Operations Monitoring44
Watching gauges, dials, or other indicators to make sure a machine is working properly.
- Quality Control Analysis44
Conducting tests and inspections of products, services, or processes to evaluate quality or performance.
- Learning Strategies41
Selecting and using training/instructional methods and procedures appropriate for the situation when learning or teaching new things.
- Mathematics41
Using mathematics to solve problems.
- Persuasion41
Persuading others to change their minds or behavior.
- Service Orientation41
Actively looking for ways to help people.
- Negotiation38
Bringing others together and trying to reconcile differences.
- Troubleshooting38
Determining causes of operating errors and deciding what to do about it.
- Operation and Control31
Controlling operations of equipment or systems.
- Management of Material Resources28
Obtaining and seeing to the appropriate use of equipment, facilities, and materials needed to do certain work.
- Management of Financial Resources25
Determining how money will be spent to get the work done, and accounting for these expenditures.
- Technology Design19
Generating or adapting equipment and technology to serve user needs.
- Programming16
Writing computer programs for various purposes.
- Science10
Using scientific rules and methods to solve problems.
- Operations Analysis6
Analyzing needs and product requirements to create a design.
- Equipment Selection3
Determining the kind of tools and equipment needed to do a job.
- Equipment Maintenance0
Performing routine maintenance on equipment and determining when and what kind of maintenance is needed.
- Installation0
Installing equipment, machines, wiring, or programs to meet specifications.
- Repairing0
Repairing machines or systems using the needed tools.
Knowledge
Organized sets of principles and facts that apply in general domains.
- Transportation73
Knowledge of principles and methods for moving people or goods by air, rail, sea, or road, including the relative costs and benefits.
- English Language71
Knowledge of the structure and content of the English language including the meaning and spelling of words, and rules of composition and grammar.
- Customer and Personal Service63
Knowledge of principles and processes for providing customer and personal services. This includes customer needs assessment, meeting quality standards for services, and evaluation of customer satisfaction.
- Mathematics55
Knowledge of arithmetic, algebra, geometry, calculus, statistics, and their applications.
- Public Safety and Security55
Knowledge of relevant equipment, policies, procedures, and strategies to promote effective local, state, or national security operations for the protection of people, data, property, and institutions.
- Administration and Management51
Knowledge of business and management principles involved in strategic planning, resource allocation, human resources modeling, leadership technique, production methods, and coordination of people and resources.
- Law and Government51
Knowledge of laws, legal codes, court procedures, precedents, government regulations, executive orders, agency rules, and the democratic political process.
- Mechanical51
Knowledge of machines and tools, including their designs, uses, repair, and maintenance.
- Engineering and Technology44
Knowledge of the practical application of engineering science and technology. This includes applying principles, techniques, procedures, and equipment to the design and production of various goods and services.
- Computers and Electronics43
Knowledge of circuit boards, processors, chips, electronic equipment, and computer hardware and software, including applications and programming.
- Telecommunications42
Knowledge of transmission, broadcasting, switching, control, and operation of telecommunications systems.
- Education and Training41
Knowledge of principles and methods for curriculum and training design, teaching and instruction for individuals and groups, and the measurement of training effects.
Show all 33 →
- Production and Processing41
Knowledge of raw materials, production processes, quality control, costs, and other techniques for maximizing the effective manufacture and distribution of goods.
- Administrative38
Knowledge of administrative and office procedures and systems such as word processing, managing files and records, stenography and transcription, designing forms, and workplace terminology.
- Chemistry35
Knowledge of the chemical composition, structure, and properties of substances and of the chemical processes and transformations that they undergo. This includes uses of chemicals and their interactions, danger signs, production techniques, and disposal methods.
- Geography35
Knowledge of principles and methods for describing the features of land, sea, and air masses, including their physical characteristics, locations, interrelationships, and distribution of plant, animal, and human life.
- Sales and Marketing34
Knowledge of principles and methods for showing, promoting, and selling products or services. This includes marketing strategy and tactics, product demonstration, sales techniques, and sales control systems.
- Economics and Accounting33
Knowledge of economic and accounting principles and practices, the financial markets, banking, and the analysis and reporting of financial data.
- Physics33
Knowledge and prediction of physical principles, laws, their interrelationships, and applications to understanding fluid, material, and atmospheric dynamics, and mechanical, electrical, atomic and sub-atomic structures and processes.
- Communications and Media31
Knowledge of media production, communication, and dissemination techniques and methods. This includes alternative ways to inform and entertain via written, oral, and visual media.
- Personnel and Human Resources30
Knowledge of principles and procedures for personnel recruitment, selection, training, compensation and benefits, labor relations and negotiation, and personnel information systems.
- Design26
Knowledge of design techniques, tools, and principles involved in production of precision technical plans, blueprints, drawings, and models.
- Building and Construction24
Knowledge of materials, methods, and the tools involved in the construction or repair of houses, buildings, or other structures such as highways and roads.
- Biology19
Knowledge of plant and animal organisms, their tissues, cells, functions, interdependencies, and interactions with each other and the environment.
- Food Production17
Knowledge of techniques and equipment for planting, growing, and harvesting food products (both plant and animal) for consumption, including storage/handling techniques.
- Foreign Language17
Knowledge of the structure and content of a foreign (non-English) language including the meaning and spelling of words, rules of composition and grammar, and pronunciation.
- Psychology11
Knowledge of human behavior and performance; individual differences in ability, personality, and interests; learning and motivation; psychological research methods; and the assessment and treatment of behavioral and affective disorders.
- Sociology and Anthropology10
Knowledge of group behavior and dynamics, societal trends and influences, human migrations, ethnicity, cultures, and their history and origins.
- History and Archeology4
Knowledge of historical events and their causes, indicators, and effects on civilizations and cultures.
- Philosophy and Theology3
Knowledge of different philosophical systems and religions. This includes their basic principles, values, ethics, ways of thinking, customs, practices, and their impact on human culture.
- Fine Arts1
Knowledge of the theory and techniques required to compose, produce, and perform works of music, dance, visual arts, drama, and sculpture.
- Medicine and Dentistry1
Knowledge of the information and techniques needed to diagnose and treat human injuries, diseases, and deformities. This includes symptoms, treatment alternatives, drug properties and interactions, and preventive health-care measures.
- Therapy and Counseling1
Knowledge of principles, methods, and procedures for diagnosis, treatment, and rehabilitation of physical and mental dysfunctions, and for career counseling and guidance.
Abilities
Enduring attributes of the individual that influence performance.
- Oral Comprehension72
The ability to listen to and understand information and ideas presented through spoken words and sentences.
- Oral Expression72
The ability to communicate information and ideas in speaking so others will understand.
- Problem Sensitivity72
The ability to tell when something is wrong or is likely to go wrong. It does not involve solving the problem, only recognizing that there is a problem.
- Deductive Reasoning69
The ability to apply general rules to specific problems to produce answers that make sense.
- Inductive Reasoning66
The ability to combine pieces of information to form general rules or conclusions (includes finding a relationship among seemingly unrelated events).
- Near Vision66
The ability to see details at close range (within a few feet of the observer).
- Written Comprehension66
The ability to read and understand information and ideas presented in writing.
- Written Expression66
The ability to communicate information and ideas in writing so others will understand.
- Far Vision60
The ability to see details at a distance.
- Information Ordering60
The ability to arrange things or actions in a certain order or pattern according to a specific rule or set of rules (e.g., patterns of numbers, letters, words, pictures, mathematical operations).
- Speech Recognition60
The ability to identify and understand the speech of another person.
- Category Flexibility56
The ability to generate or use different sets of rules for combining or grouping things in different ways.
Show all 52 →
- Flexibility of Closure56
The ability to identify or detect a known pattern (a figure, object, word, or sound) that is hidden in other distracting material.
- Speech Clarity56
The ability to speak clearly so others can understand you.
- Perceptual Speed53
The ability to quickly and accurately compare similarities and differences among sets of letters, numbers, objects, pictures, or patterns. The things to be compared may be presented at the same time or one after the other. This ability also includes comparing a presented object with a remembered object.
- Selective Attention53
The ability to concentrate on a task over a period of time without being distracted.
- Visualization53
The ability to imagine how something will look after it is moved around or when its parts are moved or rearranged.
- Fluency of Ideas47
The ability to come up with a number of ideas about a topic (the number of ideas is important, not their quality, correctness, or creativity).
- Mathematical Reasoning47
The ability to choose the right mathematical methods or formulas to solve a problem.
- Speed of Closure47
The ability to quickly make sense of, combine, and organize information into meaningful patterns.
- Depth Perception44
The ability to judge which of several objects is closer or farther away from you, or to judge the distance between you and an object.
- Number Facility44
The ability to add, subtract, multiply, or divide quickly and correctly.
- Originality41
The ability to come up with unusual or clever ideas about a given topic or situation, or to develop creative ways to solve a problem.
- Time Sharing41
The ability to shift back and forth between two or more activities or sources of information (such as speech, sounds, touch, or other sources).
- Trunk Strength41
The ability to use your abdominal and lower back muscles to support part of the body repeatedly or continuously over time without "giving out" or fatiguing.
- Visual Color Discrimination41
The ability to match or detect differences between colors, including shades of color and brightness.
- Auditory Attention38
The ability to focus on a single source of sound in the presence of other distracting sounds.
- Spatial Orientation38
The ability to know your location in relation to the environment or to know where other objects are in relation to you.
- Stamina38
The ability to exert yourself physically over long periods of time without getting winded or out of breath.
- Hearing Sensitivity35
The ability to detect or tell the differences between sounds that vary in pitch and loudness.
- Memorization35
The ability to remember information such as words, numbers, pictures, and procedures.
- Control Precision31
The ability to quickly and repeatedly adjust the controls of a machine or a vehicle to exact positions.
- Extent Flexibility31
The ability to bend, stretch, twist, or reach with your body, arms, and/or legs.
- Multilimb Coordination31
The ability to coordinate two or more limbs (for example, two arms, two legs, or one leg and one arm) while sitting, standing, or lying down. It does not involve performing the activities while the whole body is in motion.
- Peripheral Vision31
The ability to see objects or movement of objects to one's side when the eyes are looking ahead.
- Static Strength31
The ability to exert maximum muscle force to lift, push, pull, or carry objects.
- Gross Body Coordination28
The ability to coordinate the movement of your arms, legs, and torso together when the whole body is in motion.
- Gross Body Equilibrium28
The ability to keep or regain your body balance or stay upright when in an unstable position.
- Reaction Time28
The ability to quickly respond (with the hand, finger, or foot) to a signal (sound, light, picture) when it appears.
- Wrist-Finger Speed28
The ability to make fast, simple, repeated movements of the fingers, hands, and wrists.
- Arm-Hand Steadiness25
The ability to keep your hand and arm steady while moving your arm or while holding your arm and hand in one position.
- Response Orientation25
The ability to choose quickly between two or more movements in response to two or more different signals (lights, sounds, pictures). It includes the speed with which the correct response is started with the hand, foot, or other body part.
- Dynamic Strength22
The ability to exert muscle force repeatedly or continuously over time. This involves muscular endurance and resistance to muscle fatigue.
- Explosive Strength22
The ability to use short bursts of muscle force to propel oneself (as in jumping or sprinting), or to throw an object.
- Glare Sensitivity22
The ability to see objects in the presence of a glare or bright lighting.
- Rate Control22
The ability to time your movements or the movement of a piece of equipment in anticipation of changes in the speed and/or direction of a moving object or scene.
- Sound Localization22
The ability to tell the direction from which a sound originated.
- Night Vision19
The ability to see under low-light conditions.
- Manual Dexterity16
The ability to quickly move your hand, your hand together with your arm, or your two hands to grasp, manipulate, or assemble objects.
- Finger Dexterity10
The ability to make precisely coordinated movements of the fingers of one or both hands to grasp, manipulate, or assemble very small objects.
- Speed of Limb Movement3
The ability to quickly move the arms and legs.
- Dynamic Flexibility0
The ability to quickly and repeatedly bend, stretch, twist, or reach out with your body, arms, and/or legs.
Work Activities
General types of job behaviors occurring on multiple jobs.
- Getting Information94
Observing, receiving, and otherwise obtaining information from all relevant sources.
- Identifying Objects, Actions, and Events83
Identifying information by categorizing, estimating, recognizing differences or similarities, and detecting changes in circumstances or events.
- Evaluating Information to Determine Compliance with Standards80
Using relevant information and individual judgment to determine whether events or processes comply with laws, regulations, or standards.
- Inspecting Equipment, Structures, or Materials79
Inspecting equipment, structures, or materials to identify the cause of errors or other problems or defects.
- Communicating with Supervisors, Peers, or Subordinates78
Providing information to supervisors, co-workers, and subordinates by telephone, in written form, e-mail, or in person.
- Making Decisions and Solving Problems78
Analyzing information and evaluating results to choose the best solution and solve problems.
- Documenting/Recording Information76
Entering, transcribing, recording, storing, or maintaining information in written or electronic/magnetic form.
- Monitoring Processes, Materials, or Surroundings76
Monitoring and reviewing information from materials, events, or the environment, to detect or assess problems.
- Estimating the Quantifiable Characteristics of Products, Events, or Information74
Estimating sizes, distances, and quantities; or determining time, costs, resources, or materials needed to perform a work activity.
- Organizing, Planning, and Prioritizing Work72
Developing specific goals and plans to prioritize, organize, and accomplish your work.
- Updating and Using Relevant Knowledge70
Keeping up-to-date technically and applying new knowledge to your job.
- Communicating with People Outside the Organization69
Communicating with people outside the organization, representing the organization to customers, the public, government, and other external sources. This information can be exchanged in person, in writing, or by telephone or e-mail.
Show all 41 →
- Interpreting the Meaning of Information for Others68
Translating or explaining what information means and how it can be used.
- Judging the Qualities of Objects, Services, or People68
Assessing the value, importance, or quality of things or people.
- Performing General Physical Activities68
Performing general physical activities includes doing activities that require considerable use of your arms and legs and moving your whole body, such as climbing, lifting, balancing, walking, stooping, and handling materials.
- Processing Information67
Compiling, coding, categorizing, calculating, tabulating, auditing, or verifying information or data.
- Scheduling Work and Activities66
Scheduling events, programs, and activities, as well as the work of others.
- Analyzing Data or Information65
Identifying the underlying principles, reasons, or facts of information by breaking down information or data into separate parts.
- Establishing and Maintaining Interpersonal Relationships59
Developing constructive and cooperative working relationships with others, and maintaining them over time.
- Resolving Conflicts and Negotiating with Others55
Handling complaints, settling disputes, and resolving grievances and conflicts, or otherwise negotiating with others.
- Training and Teaching Others53
Identifying the educational needs of others, developing formal educational or training programs or classes, and teaching or instructing others.
- Providing Consultation and Advice to Others52
Providing guidance and expert advice to management or other groups on technical, systems-, or process-related topics.
- Working with Computers52
Using computers and computer systems (including hardware and software) to program, write software, set up functions, enter data, or process information.
- Thinking Creatively49
Developing, designing, or creating new applications, ideas, relationships, systems, or products, including artistic contributions.
- Operating Vehicles, Mechanized Devices, or Equipment48
Running, maneuvering, navigating, or driving vehicles or mechanized equipment, such as forklifts, passenger vehicles, aircraft, or watercraft.
- Performing Administrative Activities38
Performing day-to-day administrative tasks such as maintaining information files and processing paperwork.
- Handling and Moving Objects37
Using hands and arms in handling, installing, positioning, and moving materials, and manipulating things.
- Coordinating the Work and Activities of Others36
Getting members of a group to work together to accomplish tasks.
- Monitoring and Controlling Resources36
Monitoring and controlling resources and overseeing the spending of money.
- Performing for or Working Directly with the Public35
Performing for people or dealing directly with the public. This includes serving customers in restaurants and stores, and receiving clients or guests.
- Selling or Influencing Others35
Convincing others to buy merchandise/goods or to otherwise change their minds or actions.
- Developing Objectives and Strategies34
Establishing long-range objectives and specifying the strategies and actions to achieve them.
- Coaching and Developing Others31
Identifying the developmental needs of others and coaching, mentoring, or otherwise helping others to improve their knowledge or skills.
- Guiding, Directing, and Motivating Subordinates30
Providing guidance and direction to subordinates, including setting performance standards and monitoring performance.
- Assisting and Caring for Others29
Providing personal assistance, medical attention, emotional support, or other personal care to others such as coworkers, customers, or patients.
- Developing and Building Teams27
Encouraging and building mutual trust, respect, and cooperation among team members.
- Repairing and Maintaining Electronic Equipment26
Servicing, repairing, calibrating, regulating, fine-tuning, or testing machines, devices, and equipment that operate primarily on the basis of electrical or electronic (not mechanical) principles.
- Controlling Machines and Processes24
Using either control mechanisms or direct physical activity to operate machines or processes (not including computers or vehicles).
- Drafting, Laying Out, and Specifying Technical Devices, Parts, and Equipment22
Providing documentation, detailed instructions, drawings, or specifications to tell others about how devices, parts, equipment, or structures are to be fabricated, constructed, assembled, modified, maintained, or used.
- Repairing and Maintaining Mechanical Equipment17
Servicing, repairing, adjusting, and testing machines, devices, moving parts, and equipment that operate primarily on the basis of mechanical (not electronic) principles.
- Staffing Organizational Units10
Recruiting, interviewing, selecting, hiring, and promoting employees in an organization.
Work Styles
Personal characteristics that can affect how well someone performs a job.
- Attention to Detail88
A tendency to be detail-oriented, organized, and thorough in completing work.
- Dependability88
A tendency to be reliable, responsible, and consistent in meeting work-related obligations.
- Cautiousness87
A tendency to be careful, deliberate, and risk-avoidant when making work-related decisions or doing work.
- Integrity76
A tendency to be honest and ethical at work.
- Perseverance53
A tendency to exhibit determination and resolve to perform or complete tasks in the face of difficult circumstances or obstacles at work.
- Stress Tolerance51
A tendency to cope and function effectively in stressful situations at work.
- Self-Control49
A tendency to remain calm and composed and to manage emotions effectively in response to criticism or difficult situations at work.
- Cooperation46
A tendency to be pleasant, helpful, and willing to assist others at work.
- Self-Confidence45
A tendency to believe in one's work-related capabilities and ability to control one's work-related outcomes.
- Leadership Orientation42
A tendency to lead, take charge, offer opinions, and provide direction at work.
- Achievement Orientation41
A tendency to establish and maintain personally challenging work-related goals, set high work-related standards, and exert high effort toward meeting those goals and standards.
- Adaptability33
A tendency to be open to and comfortable with change, new experiences, or ideas at work.
Show all 19 →
- Initiative32
A tendency to be proactive and take on extra responsibilities and tasks that may fall outside of one's required work role.
- Sincerity29
A tendency to be genuine and sincere in interactions with others at work, without concern for personal gain or self-interest.
- Social Orientation26
A tendency to seek out, enjoy, and be energized by social interaction at work.
- Intellectual Curiosity22
A tendency to seek out and acquire new work-related knowledge and obtain a deep understanding of work-related subjects.
- Humility10
A tendency to be modest and humble when interacting with others at work.
- Optimism4
A tendency to exhibit a positive attitude and positive emotions at work, even under difficult circumstances.
- Empathy2
A tendency to show concern for others and be sensitive to others' needs and feelings at work.
Interests (RIASEC)
Holland's six occupational interest types (RIASEC) this work tends to attract.
- Conventional86
Work involves following procedures and regulations to organize information or data, typically in a business setting. Conventional occupations are often associated with office work, accounting, mathematics/statistics, information technology, finance, or human resources.
- Realistic78
Work involves designing, building, or repairing of equipment, materials, or structures, engaging in physical activity, or working outdoors. Realistic occupations are often associated with engineering, mechanics and electronics, construction, woodworking, transportation, machine operation, agriculture, animal services, physical or manual labor, athletics, or protective services.
- Investigative32
Work involves studying and researching non-living objects, living organisms, disease or other forms of impairment, or human behavior. Investigative occupations are often associated with physical, life, medical, or social sciences, and can be found in the fields of humanities, mathematics/statistics, information technology, or health care service.
- Enterprising27
Work involves managing, negotiating, marketing, or selling, typically in a business setting, or leading or advising people in political and legal situations. Enterprising occupations are often associated with business initiatives, sales, marketing/advertising, finance, management/administration, professional advising, public speaking, politics, or law.
- Social9
Work involves helping, teaching, advising, assisting, or providing service to others. Social occupations are often associated with social, health care, personal service, teaching/education, or religious activities.
- Artistic0
Work involves creating original visual artwork, performances, written works, food, or music for a variety of media, or applying artistic principles to the design of various objects and materials. Artistic occupations are often associated with visual arts, applied arts and design, performing arts, music, creative writing, media, or culinary art.
Work Context
Physical and social factors that influence the nature of work.
Telephone Conversations
Importance of Being Exact or Accurate
E-Mail
Determine Tasks, Priorities and Goals
Contact With Others
Freedom to Make Decisions
Impact of Decisions on Co-workers or Company Results
Outdoors, Exposed to All Weather Conditions
Frequency of Decision Making
Face-to-Face Discussions with Individuals and Within Teams
Wear Common Protective or Safety Equipment such as Safety Shoes, Glasses, Gloves, Hearing Protection, Hard Hats, or Life Jackets
In an Enclosed Vehicle or Operate Enclosed Equipment
Show all 57 →
Time Pressure
Exposed to Sounds, Noise Levels that are Distracting or Uncomfortable
Deal With External Customers or the Public in General
Duration of Typical Work Week
Indoors, Not Environmentally Controlled
Work Outcomes and Results of Other Workers
Written Letters and Memos
Exposed to Contaminants
Coordinate or Lead Others in Accomplishing Work Activities
Indoors, Environmentally Controlled
Outdoors, Under Cover
Health and Safety of Other Workers
Importance of Repeating Same Tasks
Exposed to Very Hot or Cold Temperatures
Work With or Contribute to a Work Group or Team
Exposed to Extremely Bright or Inadequate Lighting Conditions
Physical Proximity
Exposed to Cramped Work Space, Awkward Positions
Spend Time Standing
Exposed to Hazardous Equipment
Exposed to High Places
Consequence of Error
Dealing With Unpleasant, Angry, or Discourteous People
Level of Competition
Spend Time Sitting
Work Schedules
Spend Time Walking or Running
Exposed to Hazardous Conditions
Conflict Situations
Exposed to Minor Burns, Cuts, Bites, or Stings
Spend Time Climbing Ladders, Scaffolds, or Poles
Spend Time Using Your Hands to Handle, Control, or Feel Objects, Tools, or Controls
Spend Time Bending or Twisting Your Body
Degree of Automation
Spend Time Keeping or Regaining Balance
Spend Time Making Repetitive Motions
In an Open Vehicle or Operating Equipment
Public Speaking
Wear Specialized Protective or Safety Equipment such as Breathing Apparatus, Safety Harness, Full Protection Suits, or Radiation Protection
Spend Time Kneeling, Crouching, Stooping, or Crawling
Pace Determined by Speed of Equipment
Exposed to Radiation
Exposed to Whole Body Vibration
Exposed to Disease or Infections
Dealing with Violent or Physically Aggressive People
Typical Education Levels Reported
Education levels O*NET survey respondents in this occupation most often reported having.
Couldn't load this section right now.
Technology Skills
Specific software and technology tools commonly used on the job.
Electronic mail software
Email software, Microsoft Outlook
Spreadsheet software
Microsoft Excel
Document management software
Adobe Acrobat
Office suite software
Microsoft Office software
Operating system software
Google Android
Word processing software
Microsoft Word
Internet browser software
Web browser software
Professional Associations
Organizations related to this occupation, such as industry and licensing bodies.
Related Occupations
Occupations that call for similar work and worker requirements.
- Construction and Building Inspectors
- Supervisors of Transportation and Material Moving Workers
- Sailors and marine oilers, and ship engineers
- Cargo and Freight Agents
- Supervisors of Transportation and Material Moving Workers
- Miscellaneous transportation workers, including bridge and lock tenders and traffic technicians
- Inspectors, Testers, Sorters, Samplers, and Weighers
- Air Traffic Controllers and Airfield Operations Specialists
- Locomotive Engineers and Operators
- Agricultural Inspectors
- Cargo and Freight Agents
- Transportation, Storage, and Distribution Managers
- Miscellaneous material moving workers, including mine shuttle car operators, and tank car, truck, and ship loaders
- Supervisors of Transportation and Material Moving Workers
- Shipping, Receiving, and Traffic Clerks
- Marine Engineers and Naval Architects
- Other Healthcare Practitioners and Technical Occupations
- Compliance Officers
Detailed Work Activities
More specific, granular versions of the Work Activities above.
- Record details of deliveries or shipments.
- Inspect cargo to ensure it is properly loaded or secured.
- Record operational or production data.
- Explain regulations, policies, or procedures.
- Monitor loading processes to ensure they are performed properly.
- Recommend changes or corrective procedures.
- Mark materials or objects for identification.
- Measure product or material dimensions.
- Communicate with others to coordinate vehicle movement.
- Direct material handling or moving activities.
- Monitor cargo area conditions.
- Review work orders or schedules to determine operations or procedures.
Show all 15 →
- Measure the level or depth of water or other liquids.
- Calculate weights, volumes or other characteristics of materials.
- Examine condition of property or products.
This page incorporates information from O*NET Web Services by the U.S. Department of Labor, Employment and Training Administration (USDOL/ETA).
Based on federal labor and demographic data. Data source & methodology